🇳🇴 Completing electrification project at Troll
October 15, 2026
The Troll licence partnership has told the Norwegian Ministry of Energy that the Troll West Electrification (TWEL) project will finish after the first electric export compressor on Troll C is commissioned. The second compressor, planned in the 2021 plan for development and operation (PDO), will not be installed.
Emissions and gas supply
The partial electrification of Troll B and Troll C, completed in 2024, has cut emissions by about 330,000 tonnes of COâ‚‚ per year, roughly 75 percent of the 440,000 tonnes per year planned in the PDO. The decision is expected to make about 2.3 billion standard cubic metres of extra gas available to Europe in 2027 and 2028, roughly two years of consumption for around one million households.
Rationale for the decision
Since 2023, Troll has produced at maximum capacity year-round, which raised the value of compressor capacity on Troll C. Installing the second compressor would have cut Troll C production for up to 21 months. The compressor would only have been needed until demand ends in the mid-2030s, while Troll C runs until about 2050.
Infrastructure after completion
After completion, Troll B will have one electric and two gas-driven export compressors, and Troll C will have two electric and one gas-driven. About 26 MW of reserved power at Kollsnes will be freed up. Troll A has received power from shore since 1996.
Company comments
Trond Bokn, senior vice president project development at Equinor, said: “We believe this is the best solution when balancing emission reductions, energy deliveries and value creation.”
Frode Skarstein, senior vice president exploration and production west at Equinor, said: “Troll will remain a cornerstone of Europe’s energy supply for many years to come.”
Licence partners
Petoro AS (55.93%)
Equinor Energy AS, operator (30.55%)
A/S Norske Shell (8.19%)
TotalEnergies EP Norge AS (3.69%)
ConocoPhillips Skandinavia AS (1.64%)
Originally published on October 15, 2026 by Equinor.
Announcements for publication can be submitted to [email protected]
